Kanguru Optical Duplicator Bedienungsanleitung PDF herunterladen (Seite 77)

9. When the transfer has completed, you will see the image file available in the right window.

Note: If you don’t see the image file in the right window, click on the Refresh button.

10. After you have finished transferring your image files, click on the Disconnect button. You will receive

the message “Disconnected Successfully!”. Caution! It is important to disconnect the CopyConnect

connection before closing the application. Failure to do so may cause the data on the duplicator’s hard

drive to become corrupted.

11. After you have disconnected CopyConnect, turn the USB Connection setting on the Duplicator to

Off (see section “3.15 USB/External Connection” on page 51). You may be required to restart the

Duplicator.

12. Disconnect the USB cable.

When the Duplicator boots up, you will be able to access the Duplicator’s hard drive from the Duplicator

again.

Appendix C: CopyConnect for Mac

1 2 ... 72 73 74 75 76 77 78 79 80 81

Keine Kommentare

Kanguru Optical Duplicator Bedienungsanleitung Seite 77