Kanguru BR-DUPE-S1 Betriebsanweisung PDF herunterladen (Seite 24)

3.8 Test & Copy

The Test & Copy function combines the Test function (see section 3.7 Test, p.22) and the Copy function

(see section 3.4 Copy, p.14). The Test & Copy function will simulate the testing process and once the discs

pass the Test process, the Copy process will begin automatically. If there’s an error during the simulation,

an error message will be displayed on the screen and the copying process will not be initiated.

Counter :

No Counter

1. From the Main Menu, press the UP or DOWN button to

navigate to Test & Copy. Press the ENT button to enter

the Test & Copy menu.

2. You will see the Counter screen. For more information

on the Counter, see section 3.2.2 Setting a Job Counter,

p.11.

Kanguru Solutions

5. Test & Copy

Once you have set the Counter, any trays that do not contain discs in them will automatically be ejected.

You will see the following Preparation screens:

Preparing...

Waiting for Master

Preparing...

Waiting for Blanks

3. Insert discs into the drives.

After you’ve loaded the drives with discs, close the trays and allow 5 - 10 seconds for the system to detect

them. If either of the preparation screens are displayed for more than 2 minutes after you have inserted

your discs, please check the quality of the discs.

Once all the discs have been recognized, you will see the Confirmation screen.

Preparing :

7 Discs Detected : Go?

Preparing...

Please Wait

Note: The “7” indicates that there are seven discs recognized

by the Writers. The actual quantity may be different

depending on the number of discs you have inserted.

4. When the number of discs detected matches the number

of blank discs you inserted, press the ENT button. You

will see the Processing screen.

Test & Copy

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 88 89

Keine Kommentare

Kanguru BR-DUPE-S1 Betriebsanweisung Seite 24